Palisade tence

Palisade fencing and gate systems are hot-dip galvanised to protect from rust and can be powder coated in a variety of RAL colours. The systems are strong, have increased security and are aesthetically pleasing.

Palisade gates and fencing has been successfully used in the following applications as a cost effective means of security: Industrial and Commercial premises, Electricity Sub-Stations, Gas Installations, LPG Installations, Research Laboratories, Fuel Terminals, Computer Centres, Sewerage and Water Treatment Plants, Railways and Motorways, Police Stations and Courts.

We sell palisade fences in kit form, usually are composed of palisade pales, palisade rails, palisade post and fence fittings including fish plates, post clamps, bolts and nuts. Palisade pales are available in D section, W section and angle steel types. All the pales are bolts to two horizontal palisade rails as standards. Once the fence height is over 3 meters, one more palisade rail is needed to maintain the integrity for high security.

Specifications Details:


Material: low carbon steel, stainless steel, hot rolled or cold rolled.

Fence length: 2.75 m.

Fence height: 1.2 m to 3.6 m.

RSJ post: 102 mm × 44 mm for fences below 2.7 mm, 127 mm × 66 mm for fences above 2.7 mm .

Square post: 50 mm × 50 mm × 1.6 mm thickness or 76 mm × 76 mm × 1.6 mm thickness.

Pales height: 1.2 m to 3.6 m.

Pales thickness: 2 mm to 5 mm .

Anti-rust surface treatments: hot dipped galvanized or PVC coated with various colors (green, blue, yellow, red, shown as the picture above) for higher rust resistance.


Palisade Fence Panel Pale Section and Head Profile
Standard HeightPale SectionHead Profile
1.2 m3.0 mm "D"rounded & notched
1.5 m3.0 mm "D"rounded & notched
1.8 m3.0 mm "D"rounded & notched
1.8 m3.0 mm "D"triple pointed
1.8 m2.0 mm "W"triple pointed
2.0 m2.0 mm "D"rounded & notched
2.0 m3.0 mm "D"triple pointed
2.0 m2.0 mm "W"triple pointed
2.1 m3.0 mm "D"triple pointed
2.1 m2.0 mm "W"triple pointed
2.4 m2.0 mm "D"triple pointed
2.4 m3.0 mm "D"rounded & notched
2.4 m2.0 mm "W"triple pointed
2.4 m2.5 mm "W"triple pointed
3.0 m3.0 mm "D"triple pointed